I. Application
Empty Capsule Shell are one of the most common choices for pharmaceutical filling and occupy an important position in the pharmaceutical manufacturing industry. It is often used as special packaging for medicines or health products that are odorous, sensitive to light or in humid or hot conditions. Compared to tablets and pills, capsules can provide better bioavailability and offer other advantages in terms of ease of preparation, transport and use as well as safe, void-proof packaging.
II. Appearance
Empty Capsule Shell is made up of a cap and body with two sections of capsule shell. Each part's end is round and sealed, while the other end is open. A large bore cap over a small bore body with a good seal after locking the mouth.

Normal sizes are 000#, 00#, 0#, 1#, 2#, 3#, 4#, the bigger the number, the smaller the size.
Detailed Size specification as below,

In addition to opaque white, we also produce a wide range of other colours such as red, green, yellow, blue, etc.

Why we use different colors on one capsule?
1. More aesthetically pleasing, disguising the colour of the medicine itself;
2. Colour due to shading agents, some light-sensitive drugs may have calcium carbonate or zinc oxide added to the capsule shell as a shading agent and therefore take on a different colour;
3. The two coloured capsules are easier to identify and allow differentiation between different production processes, types and medicines.
What about the capsules that are transparent?
The purpose is to let the user know whether the capsule contains powder or granules, and also to remind the user whether the capsule is safe to consume as some capsules change form when they deteriorate.
III. Two main types of Empty Capsules
Empty HPMC Capsules and Empty Gelatin Capsules are two most common choices.
|
Empty Gelatin Capsules |
Empty HPMC Capsules |
|
|
Types |
Animal source |
Plant source |
|
Main ingredient |
Gelatin(from animal bones and skin)+water |
HPMC(from cotton linter, wood pulp)+water |
|
Manufacturing process |
Gelatine is obtained from animal tissues under appropriate conditions through a series of processes such as degreasing and demineralisation. The gelatine or HPMC is dissolved in water at the right temperature to form a solution. The special mould is immersed in the hot solution, which gels into a film when it is cold, and then dried and polished. |
|
|
Moisture |
12.5-17.5% |
4-7% |
|
Solubility |
Rising in cold water at 25°C, insoluble |
In cold water at 25°C, gradually dissolved |
|
Crush |
below 5 out of 50pcs |
0 |
|
Safety |
Risk of BSE |
Safe |
IV. The Disadvantages of Empty Gelatin Capsules
1. Because of its moisture content of 12.5%-17.5%, it is easy to lose water in the process of placing, resulting in poor toughness and softening due to moisture absorption, and has high requirements on the temperature and humidity of the storage environment (15-25°C, RH35-65%) and the material of the packaging.
2. It's main component is gelatine (protein), which crosslinks with amino acids, aldehydes, reducing sugar-based compounds and vitamins.
V. The Advantages of Empty Gelatin Capsules
1. Cheaper than HPMC Capsules;
2. Low breakage rate when caps are separated.
VI. The Advantages of Empty HPMC Capsules
1. Moisture
-Self-stability
Empty Gelatin Capsules' shells will become brittle and risk brittle fragmentation when the moisture content falls below 10% and will definitely become brittle when the moisture content is reduced to 5%; whereas fragmentation will not occur even when the moisture content of HPMC Capsules is reduced to 1%.
Under high humidity conditions gelatine capsule shells will become soft and sticky, resulting in adhesion to each other or to the packaging material; and the exchange of moisture with the environment during long-term storage of HPMC capsules will increase the moisture content of the capsules in the prescribed packaging, but will not sleep above 9% for 5 years.
-Impact on the filled drug.
The relatively high water content of gelatine capsule shells can cause water migration towards the drug when filled with easily absorbent drugs, resulting in brittle shells and delayed disintegration, which does not occur with HPMC capsule shells. Therefore, HPMC capsules are mostly chosen for moisture-sensitive, highly absorbent drugs, such as dry powders for inhalation and Chinese herbal extracts.

2. Natural Concept
The main ingredient of gelatin capsules is protein, which is prone to bacterial growth and requires the addition of preservatives and sterilisation with ethylene oxide before packaging; whereas the main ingredient of HPMC capsules is Hydroxypropyl methyl cellulose, which is less prone to microbial growth and therefore no preservatives are added during production and no sterilisation is required, fundamentally solving the problem of residual chloroethanol.
3. Chemical structure
Gelatine capsules are mainly composed of gelatine (protein), which is cross-linked with amino acids, aldehydes, reducing glycosyl compounds and vitamins, while HPMC is a modified polymer of natural polymeric cellulose, which is chemically inert and has no interaction with the filled drug.
4. Safety
HPMC of plant origin is not susceptible to animal-derived diseases or excessive levels of the heavy metal Cd.
Gelatin capsules, on the other hand, are mainly made from the bones and skins of pigs, cattle and sheep, and there is a risk of spreading mad cow disease and hogs foot disease.
